Rolling road day at Power Engineering 21.01.06

[GrahamM]

Some videos for you.

They were encoded using QuickTime 7 Pro so you need QT 7 or some other AVC/h.264 decoder to play them.

R34GTR 1
R34GTR 2
R34GTR 3

[YODI]

Originally Posted by Yunis A

any chance of a list of what power/torque people put out?

Sorry Guys I had to much on and didnt get all the figures, they will be published in J-Tuner though with the feeature and copies of the graphs.

Yodi

Well done YODI
It was a well organized event with a good turnout, good venue with plenty of coffee, although there would have been more biscuits if Gordon hadn’t spotted them first

As for the results, couldn’t everyone who ran post them on here??

P.S I would have posted mine but my results are at home and I’m at work, but ill post when I get in tonight.

[canker]

Ok I`ll start

R32 GTR STAGE1 387BHP AT 7250rpm and 306ft lbs torque from 3700rpm all the way to redline

[Lenny]

Originally Posted by GTO NEMESIS

To me, an engine is an engine, it's all down to the right air, fuel and spark.
If a place can MAP/tune one car, they can tune them all...

If only that were true I'm pretty sure most tuners don't have a clue how to tune both leading and trailing ingnition maps properly. If you tuned a rotary the same way most people tune a piston engine, you will end up with a lot of scrap metal.

But skylines don't have rotary's so who cares

It was a good day out, little bit cold though! A good turn out of nice cars and a very friendly venue and for everyone wondering where my car was, don`t worry - I will return................

Originally Posted by canker

Ok I`ll start

R32 GTR STAGE1 387BHP AT 7250rpm and 306ft lbs torque from 3700rpm all the way to redline

Did anyone ask if the reading we where given (i.e the print out) was ATF or ATW?

I forgot to ask, I hope its ATW or my car has lost 30bhp in one week

[GTO NEMESIS]

Hi,
All figures at PE are at the flywheel.

Mark

[R32-GTR]

I used there rolling road back in the summer and got a 401bhp.. anyone know if their rollers are accurate compared to other ones you may have used recently?

[canker]

I believe there dyno was only recalibrated a couple of months ago.

[Pete]

Originally Posted by Lenny

But skylines don't have rotary's so who cares

No, I believe the last time I heard something like that it had John Deere written on the side

[Lenny]

It's all about pulling power Pete, didn't I teach you anything!

[Pete]

I did wonder what the three point linkage on the back was for.

[malaka]

A bit late,but i'd like to thank Yodi and the lads at PE.It was a top day out and well organised.Lots of amazing and different cars to admire and lots of wicked people.I was a little dissapointed with my figures,but it was such a good day i got over that pretty quickly.Cheers and thanks again to all involved.Roll on the next one!!

[Rixio]

Hey hey i know this car...saw it at the tunnel run looks great...didnt get chance to meet you though unfortunately u took off rapidooo stylee without warming up ur car before i got chance...anywho stunning car matey