So, I spent some time replacing the pre filters in my sytec bullet filters and cleaned out the post filters.
This is the state of the paper filter that came out: -
This could be the reason why the fuel pressure was dropping at high rpm/boost on the dyno after there was some...
Does anyone have any first hand experience of using Deatschworks injectors?
Looking to replace my existing not so good 550 side feeds?
trying to weigh up options of keeping with reasonable price side feeds vs top feed conversion
I started up my skyline after 5months. It runned on all 6 unntil i started driving a little bit, then it started running on 5 and now on 4 cylinder. It wont run on cyl 4&5.
I have ignition and i have tried to switch coils and sparkplugs so i know they work. I can hear the injectors...
Hey guys, sorry if this question has been asked before but i have searched around heaps and havent really gotten the answer i was looking for..
From what i have read you cannot install a greddy style plenum with a standard side feed rail.. is this correct? Is there a side feed aftermarket rail...
The basics of 'This Week Only'
It will run Friday to Friday, 7 days
Once the offer has finished thats it, price goes back to original
Full payment needs to be received within the 7 days to receive the offer price
Any questions please ask!
All Prices are Plus VAT
ACL Main Race Bearings...
I am new in here , and new in skyline tuning.. BUT ;)
I am working on a little upgrade project.
3 " Exhaust
Garret GT3582 Turbo
Top Mount "China" manifold
"China" 38 mm wastegate
BIG intercooler :D
SPEC Stage 3+ Clutch
modified AEM Flywheil
I have some spare bits that I figure could be useful to someone on here. (prices excluding postage and open to offers)
6 top feed injectors (from RB20DET) - £60
(can get pic if required)
Cam Angle Sensor - £50
Viscous fan (minus coupling) - £30
Viscous fan radiator shroud - £30
I'm after some parts for my r32 GTS4 (2 door):
- Set of working door/boot/ignition locks
- Standard ECU
- Standard Injectors
All of which I'd need delivering, and would be paying through paypal.
Thanks in advance folks!