Skyline Owners Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 75 Results
  1. FAQ's
    hi there i got a HR34 and it stop start i dont know why when i try to start the car it crunk but did not start and when i stop crucking it i get a sound from the trriger ( 3 or 4 tiking sound ) with a engine flashing i change everything and look at the timming for the engine every thing ok i...
  2. General
    Hello, before posting this i just want to say that i tried to do as much research but still cant find an answer to what im dealing with here. i have a r32 gts with a rb25det series 1 swap. It has a wiring specialties harness and all the accessories it needs to run with the AEM series 2 ecu. I...
  3. Tuning, Technical Questions
    Just picked up an R33 with an RB25DET NEO motor a few months ago. Had it tuned and right after the tune (12psi stock turbo) even as I was driving home I started to hear this sound like a whine under a lot of boost. Not exactly sure if it’s full boost but it’s close. Still driving it and don’t...
  4. Tuning, Technical Questions
    As the title says, my Turn Signal Connector burnt up kind of like the Headlight Switch, I noticed when my front left headlight wasn't working and then high beams, took apart the steering column and took out the connector and noticed it had charred on the bottom two connections. But the bad part...
  5. Tuning, Technical Questions
    So as I was putting in my new tail lights for the R32 Sedan I had to disconnect the rear battery to get to two of the nuts, as soon as I reconnect the battery when I finished the installation I have had a continuous two tone faint beeping in the car, kind of like an alarm clock, my two sources...
  6. Newbies
    Recently got my hands on a Gun Metal Gray 1992 Nissan Skyline R32 GTS with an ECR33 RB25DET S2 Swap. Car was originally a ECR32 Type XG. The car has quite a few mods to it including: RB25DET S2 Engine w/new Turbo GTR Grill GTR Hood GTR Driver Seat GTR Passenger Seat R32 GTR Wheels Greddy...
  7. Tuning, Technical Questions
    Hi Guys, so last week after a hard drive my R34 GTT has a pretty loud whining/wirring Noise coming from the front of the Engine. Its hard to catch on Camera since theres a lot of windnoise coming from the Ventilator in the front, i guess you can hear it the best while idling after reving it...
  8. FAQ's
    Hello everyone I know this topic has been covered a multitude of times but It’s always been plugs and coils plugs and coils, so I bought my c33 about a month ago with an Rb25det series 1 swap car runs idles very well under 5k rpm builds about 0.5 bar of boost but whenever I go WOT after 5k the...
  9. Tuning, Technical Questions
    Dear all Today i went to Testdrive a R34 GTT. The car seems to be in a great Condition and all around serviced well enough. It has 110k Kilometers on it and since 20k a Engine swap, the Vendor told me its a RB26 Swap, but i'm sceptical since it looks pretty much like a RB25DET NEO to me. Could...
  10. Tuning, Technical Questions
    Hi there, Let me first say I am completely new to engine swaps, the closest being removing body panels and bodywork. I realise it's a daunting task but I found a good rolling body with newly rebuilt gearbox. Not much RB20DETs with anything lower than 180,000km when there was a rb25det with...
  11. Tuning, Technical Questions
    Hey guys just thought I’d put a post up and ask some people’s opinions while we are on lockdown here in NZ. I’ve got a series 2 25det in a 32 coupe and it’s missing / stuttering right on limiter, like it won’t sit on limi and bang off it . Eg if I’m in a slide it’ll be fine till I wana clutch...
  12. General 350/g35
    Hi all, I've been a bit of a fairweather poster on here over the years, so apologies if i haven't given much in return so far. I have a 350GT manual and i've been looking at F/I options and costs (which are scary), and i wondered if anyone has done a conversion and put an RB25DET into a...
  13. General
    I’m needing an 90 elbow welded onto my compressor housing. The elbow I have is perfect fitment. the only problem is the elbow is aluminium and the compressor housing is cast aluminium. Can this be done, I’ve seen pictures online and it looks as if it’s been done before. What filler rod and what...
  14. General
    So I installed a greddy manifold and fuel rail on my RB25DET Neo and I’m having trouble setting the correct fuel pressure (43psi without vacuum). Every time I try set it the needle on the gauge flutters like mad. I can set the fuel pressure just below 40psi and the needle stays still. As soon as...
  15. Tuning, Technical Questions
    Hello everybody, Recently I got Skyline R33 GTST and already fixed common issues like a speedo, suspension ball joints, HICAS joints, air conditioner actuator etc. At the moment I am having problem of leaking oil from the oil cooler. To fix that I already got new seals and O-rings, had already...
  16. General
    Sorry for being ignorant on the topic, it seems very unclear upon all the research ive done other than its the way to go. What will i need besides the gearbox of course to fit a 25 box to my RB20 block?? Please clarify.
  17. Tuning, Technical Questions
    So i was hoping someone would be able to help me, or give me ideas. I've been searching online for days and hours and can't find out what the problem is with my car. It's an r33 with a RB25DET Engine Mods: Microtech ecu Greddy BOV Return flow fmic Splitfire coilpacks Pod filter The car has...
  18. Tuning, Technical Questions
    Hey guys, Can anyone tell me the difference between the RB25DE and RB25DET heads? Other than the intake stud pattern and cams. Like does one flow better than the other or anything like that. I'm building my RB30 and have both options (25DET one in car so I can't inspect) and will be using a FFP...
1-18 of 75 Results
Top