Skyline Owners Forum banner
1 - 15 of 15 Posts

·
Seasoned Member
Joined
·
1,735 Posts
It reckons I should be doing high 13's with 270bhp and around 1400-1500kg weight, last time I went it was a cool day and I got wheelspin (the tyres had only covered 400 miles?) but got a 14.6 any good?

My 0-60 at the national day was 6.2 with my mate in the car so around 5.9 mabeyso might get a better time now I perfected my launch.

Have to have another go lol.
 

·
Registered
Joined
·
1,035 Posts
14.6 is pretty good I think, my best is 14.8. Thats full weight inc the spare wheel heh, and 3 illegal tyres :( Hoping to get a quicker time now I have some nice tyres!
 

·
Registered
Joined
·
4,045 Posts
Got a 14.27 at santa pod stock with

3/4 of a tank of fuel
2x 10" sub and box in the box
spare wheel and 2 tonne trolly jack in boot

oh and the strongest head wind EVER recorded at the pod that even slowed down fire force by 100 mph yes 100mph!!!!
 

·
AKA The Torque Monster
Joined
·
1,096 Posts
Well thats what i got. be intresting to loose some weight and see the diff.
What weight would ya loose by striping out your car????

For an explanation of how these figures are derived click here
Power at Flywheel (BHP) : 605
Weight without Driver (KG) : 1490
Power to Weight Ratio (BHP Per Ton) : 412.56
0 - 60 (Secs) : 2.96
0 - 100 (Secs) : 6.72
60 - 100 (Secs) : 3.76
Quarter Mile (Secs) : 11.34
Terminal Speed (MPH) : 129.97
Drag Strip Quarter Mile (Secs) : 10.94
Drag Strip Terminal Speed (MPH) : 134.47
 

·
Aberdeenshire Area Rep
Joined
·
1,104 Posts
Not sure what my wieght would be but...

My cars stock apart from Exhaust, Decat, HKS Induction, Suspension, 2 stage boost gone but boost still set to 0.7bar and i've run a 13.87sec :D Thats with 280bhp :)
 

·
Aberdeenshire Area Rep
Joined
·
1,104 Posts
Is that at the wheels?
The 280bhp was actually before the decat and boost adjust (so just exhaust and filter) but think it was at the fly tbh.

FMIC going on very soon though! ;)
 
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top