Skyline Owners Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
8,411 Posts
Discussion Starter · #1 · (Edited)
Hey guys, I could do with your help please!

1.) Does the AFM of an R33 GTS-T Spec 1 fit my R34 GTT? Can I just take mine off and put a R33 one on or is there a problem concerning the plug-that it won´t fit?

2.) How can I test my knock sensors? Anyone who can give me short explanation? Would be great!

Thanks for your help! :cheers:
 

·
Registered
Joined
·
8,411 Posts
Discussion Starter · #2 ·
Ok, found out that my knock sensors are fine. You can see if there working by using the "SAFC II testmode".

Any thoughts to AFM plug?
 

·
Registered
Joined
·
62 Posts
I would have thought the plugs were different r33 gtst s1 used a 4 wire AFM then later the s2 went to a 3 wire unit.
 

·
Registered
Joined
·
828 Posts
The plugs are different between the series 1 and 2 R33.
I dont know for sure but i wouldnt expect a series 1 r33 will be a direct swap with your r34.

If you got the afm with a plug though it shouldnt be to hard to swap it over.Most of the series 1 plugs are the same as the z32 afm plugs.
 

·
Registered
Joined
·
8,411 Posts
Discussion Starter · #5 ·
Ok, thanks guys! I´ll have a try and let you guys know. Just for the case that someone else is gonna have the same question in future. :cheers:
 
1 - 5 of 5 Posts
Top