[koh]

i really fancy doing this mod at the same time as the intercooler,however ive had a pm from japseed saying i need air adaptors???? and its a real ***** to fit? anyone fitted this yet??

 

[iansr33]

do you know what he means by air adaptor?

 

[iansr33]

ih i know what you mean now. on the standard inlet manifold there are pressure take off's. a few for the carbon canister, fpr and dump valve i think. on the new manifold there are three holes under neath for these take off's, you need to tap a thread into the holes then find some sort of screw in nipple thingy to put the hoses on.

 

[koh]

ah thats p1ss easy
what about fitment,there is a shed load of space over that side of the engine?

 

[iansr33]

i have seen pauls one when he first fitted it and there is loads of room, think about it this way. the shell is the same as a gtr and all you are doing is fitting a gtr style inlet so clearance issue's should be none existent. you will have to move the washer bottle to the boot as the pipe on pauls goes straight through where this is.