Skyline Owners Forum banner

Carbon (bonnet) re-finishing and down pipe re-weld

678 views 0 replies 1 participant last post by  BennyT 
#1 ·
Hi folks,

As per title, any recommendations in South (east) of England for;
1) Carbon bonnet re-finish. It is in OK shape but needs some crud removal from the lip (something was stuck on it) and taking back and re-lacquering elsewhere. I guess any half decent body shop should be able to do it.
2) My (custom) elbow / down pipe doesn't line up properly. I made it up myself and had it welded but the alignment is off so the exhaust hangs too far back, and it's starting to really irritate me. Basically I need the elbow flange cut off and re-welded, in place, to get the alignment right. Not sure who is good at this kind of stuff.

Cheers
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top