Skyline Owners Forum banner

1 - 4 of 4 Posts

·
rebuilding my r33 rb25det
Joined
·
335 Posts
Discussion Starter #1
hey guys since rebuilding the car i wanted to know it was running ok so took it to be dynoed
up at austec to check everythings ok and videod it ill put up some pics on my thread later but heres the vid the car made 253.6 bhp with 0.5 bar and they said cars running and fuelling fine so very happy well here the link to vid hopefully works ok

https://www.youtube.com/watch?v=7H_VUUsS9yU
 

·
stuck in the middle .....with you
Joined
·
8,249 Posts
how come you were at 0.5 bar,that sounds like you have removed the boost solenoid and gone direct to the actuator as thats what the standard actuator is set at,earthing the boost solenoid will give 0.65 bar constant (standard setup is 0.5 to around 4.5k revs then 0.65 bar to redline)
 

·
rebuilding my r33 rb25det
Joined
·
335 Posts
Discussion Starter #3
how come you were at 0.5 bar,that sounds like you have removed the boost solenoid and gone direct to the actuator as thats what the standard actuator is set at,earthing the boost solenoid will give 0.65 bar constant (standard setup is 0.5 to around 4.5k revs then 0.65 bar to redline)
It is running standard that's why one of the next things will be boost controller
 
1 - 4 of 4 Posts
Top