Skyline Owners Forum banner

1 - 5 of 5 Posts

·
stuck in the middle .....with you
Joined
·
8,249 Posts
Discussion Starter #1
this is the instructions

i need to know what is the signal wire(colour etc...)
and whats wrong with the grey wire,i thought r33s used 5 wires
 

·
Administrator
Joined
·
25,965 Posts
i removed my speed converter and soldered it as per andy42uks guide and i would recommend doing that instead as it allows all sensors and hicas to function correctly mate:cheers:
and the one i removed was a 5 wire one but one wire wasnt connected.
 

·
stuck in the middle .....with you
Joined
·
8,249 Posts
Discussion Starter #3
Im locking off the hicas soon anyway(i think the 53 wire is cut as its still in kms but has no limiter)i have never been a fan of hicas and i believe that the speedo converter only interfears with hicas from what i have read over the past couple of days,how can i tell if wire 53 is cut?where is it?
 

·
Administrator
Joined
·
25,965 Posts
i think its at the ecu and converter chips do affect the hicas as the chip holds the signal just before the limiter but allows the speed to rise,unfortunately the hicas doesnt get correct signals hence why so many peaple have brown trouser moments. but if you check the faqs there is guides in there and im sure there is one about wire 53??
 

·
stuck in the middle .....with you
Joined
·
8,249 Posts
Discussion Starter #5
Im going to be fitting it tomorrow so does anybody know which wire is the signal wire?
Also the car is using a mines ecu,does this make a difference
 
1 - 5 of 5 Posts
Top