Skyline Owners Forum banner
1 - 1 of 1 Posts

·
Space Filler
Joined
·
3,218 Posts
One thing I would reccomend before you take off the covers for the tank is to hover all the crap off the top first, then go over it with some kind of wet wipe to remove all the muck that's left. Take a small flatblade screwdriver as well, and go round the inside edge of the lip between the cover and the tank, then hoover all the junk out of there that you loosen. This will stop anything getting in to the tank.

Also, when you put the tank hanger back in, make sure the floater for the petrol guage goes on the outside of the small metal sub-wall that the pump goes inside. I didn't and my guage only went up halfway when the tank was full, because the floater was hitting the wall and not going any further.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top