[cruising_r32]

Hi, I've just bought an Apexi RSM from a friend with out the instructions.
Can anybody here help me out with a join the blue wire to the green wire kinda list please?

Alan.

 

[cruising_r32]

There is a black, red, yellow, purple, blue, grey, white, brown and pink wire.
My mate has the Blue, white and brown wire seperated as they were not used in his scooby.

 

[SARU]

black is ground
red is power +12V
yellow tap into rpm signal
purple tap into speed signal
btw if you intend to use it as a delimiter (112mph) you ll need to cut the speed signal wire and connect the purple to the speed sensor side and the pink wire to the ecu side

dunno bout the rest for the mo but i'll look it up for ya

 

[SARU]

try this one

http://www.apexi-usa.com/pdfWiring/3.pdf?bcsi_scan_574ABF7FC15418AB=0&bcsi_scan_filename=3.pdf

 

[cruising_r32]

Thanks for your help on this guys.
**** called over this evening and between us we figured it out and got it installed.
It looks great, measure's speed, revs, voltage and something else but hasn't removed the limiter
Its too dark to go looking at wires now but I'll see if I can figure it out in the morning :boogy:

 

[cruising_r32]

It was just a lose wire that was stopping the delimiter, so its all good now..... well hopefully.
Haven't been able to use last nights "private track" again yet to see for sure.

 

[mick-skyline]

that we did, and get it tested in the morning