Skyline Owners Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter #1 (Edited)
Hi all,
I feel the std 17" alloy don't fill the arches as much as they could so I'm thinking of changing the alloys but a bit lost on offsets etc. I was hoping on getting details from the other thread I started but only 2 people posted.

I understand the std wheels are 17" 7.5J with 28 ET.

Std 350z are 18" 8J with 30 ET
350z Rays are 18" Fronts 8J with 30 ET and rears 8.5J 33 ET.

So which will fill the arches more?

And if I go for after market one what ET should I get and whats the offset range on a gt?
What if i fit spacers?

Thanks.
 

·
Super Moderator
Joined
·
8,968 Posts
The offsets on the 350GT are negative, so the smaller the figure the further out in the arches they will sit, sorry cant remember what those wheels of mine where, but they had low offsets, and spacers.
 

·
Registered
Joined
·
205 Posts
Discussion Starter #3
The offsets on the 350GT are negative, so the smaller the figure the further out in the arches they will sit, sorry cant remember what those wheels of mine where, but they had low offsets, and spacers.
Hi, so the ET for the std wheels which I qouted in my 1st post are wrong then?
 

·
Super Moderator
Joined
·
8,968 Posts

·
Registered
Joined
·
1,798 Posts
Also depends how you want the car to look/sit/handle too, you won't fill the arches with any of those stock wheels (without a large spacer) and without a drop


Sent from my iPhone using Tapatalk
 
1 - 7 of 7 Posts
Top