Skyline Owners Forum banner

1 - 4 of 4 Posts

·
Track addict
Joined
·
4,907 Posts
Discussion Starter #1
Right guys how many of you are using this tubby with an electronic boost controller, or better still with a greddy profec controller. I have been reliably informed that to adjust the boost you have to set it via the actuator. Which renders the boost solenoid useless. I wanted to have a low and high setting which i could adjust from in the car, but more importantly i want the boost right down while i run my new motor in. So how did you guys plumb a boost controller into this turbo:cheers:
 

·
Registered
Joined
·
828 Posts
Ive pm'd you mate how to do it.
It can be done as i have a greddy profec on mine to.

You need to reduce your boost via the adjustable actuator downwards to i would say around 10psi.Whatever you set it to will be the least boost you will ever likely to use as the greddy can only increase the amount you use.

Use the hks vacumm black pipe to the actuator end and use that for the greddy profec boost valve.
The other end of the greddy boost valve will go to your actuator itself
 
1 - 4 of 4 Posts
Top