Skyline Owners Forum banner
1 - 20 of 130 Posts

·
At home playing with myself!!!
Joined
·
3,180 Posts
looking good mate, what you doing in the first picture?? re clamping your intercooler hose?:)

having a wash picture look pretty deep to me lol!
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #4 ·
as i have just got this hks bov on a hard pipe i thought i would blank off the std recic

to take the std recic off its just two 13mm bolts and two pipes

five mins later and its off

i have noticed that the std valve isent 100% air tight because off the hole on the left of it in the pic any one got any ideas why?
any way into the garage found a bit of ally plate put the valve on top and mark round it

all marked out

i decidedto cut it out with a jig saw as i am lazy lol and cant find my hacksaw

abit of shaping with the beanch grinder

after a bit of fetleing with a file for the endes tip always chalk your file first cause the ally will blok the file up with swarf

lineing op the holes this is a 9 mm hole i pre drilled it first

9mm hole drilling

the final item finished
 

·
At home playing with myself!!!
Joined
·
3,180 Posts
course it will look as good as if not better, i cant spend much more on mine now we have a baby on the way, just making the most of it lol.
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #7 ·
course it will look as good as if not better, i cant spend much more on mine now we have a baby on the way, just making the most of it lol.
ive already got one lol he was three the other day
i eat i baked bean a day to aford to do up me skyline:poop:
do you know what your aving yet? how far gone?
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #8 · (Edited)
my head unit and crappy boost gauge want some white gauges that glow up blue at night


ave put some dls mids and tweets in the front doors with a full skins kit

got a alpine 12" sub and amp in boot only 350 watts got given a blown up 1500w alpine ampwill cost me 120 to get it fixed then will have to find some speekers so i can have some bad ass bass
 

·
At home playing with myself!!!
Joined
·
3,180 Posts
she's 27 weeks now and having a girl.:40oz:


so what plans have you got for the car next? do you know what power you are kicking out yet?
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #11 · (Edited)
she's 27 weeks now and having a girl.:40oz:


so what plans have you got for the car next? do you know what power you are kicking out yet?
congrats is this ur furst its a life changing experiance
I CANT SPELL FOR SH!T:sorry:

i want a (hope you ave got a long time)
gtr rear spoiler
ajustable coilovers
strut braces
body kit
respray
new turbo
new ecu
ect
ect

i ave got
r34 gtt int cooler (thanks to andre)
titainium exaust
apexi afm and filter
hks daul dump valve and ajustable acuator
more power then the fing volvo that over took me yesturday
about 400 odd would be nice might even forge the engine myself:)
and soz dont know what power its kicking out yet but is boosting to 9 psi now with the hks actuator
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #14 ·
my led dash

new oil cap

one thing that yoused to wind m up was that my interia light would turn off as soon as the door shut
so i figurd out this light stays on for ten secs after my door has been shut

ran a wire up from this to the map reading light and connecter two leds left over from my dash conversion

this is wat it looks like at night a nice suttle light

in the day

with the other light on

this is only temp at the mo will mount the leds in there properly on the week end
me other mod a festoon 31mm 4 led light for the light in the middle of the car

in and working

well bright now with the defuser back on

both light together

bit of a crappy pic but you get the idea what you think???
 

·
solheim
Joined
·
1,027 Posts
Discussion Starter · #19 · (Edited)
fitting the dails

clocks minus the plastic cover

you have to take the rev bit out and take the mmg gauge off


new dails goin on


i put all the faces on the dails then relised i didnt have anything to stick the new faces down with so it was off to the shops minus a dash and clocks that was a bit weired lol:boogy: right then got no pics of it goin in because it was gettin dark so ive got the dails in and wired up will be off in a moe to put it all back together this is how they look
 

·
At home playing with myself!!!
Joined
·
3,180 Posts
very nice mate, was it easy to get the clocks out? and how easy was it to get the new plazma;s in? also you must have some money!! its not very often my fuel gauge goes up that high!.
 
1 - 20 of 130 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top