Skyline Owners Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
579 Posts
Discussion Starter · #1 ·
Did do a search but couldn't find anything in particular that would help me out.


Basically my car will be returning to me in the next couple of weeks fully rebuilt 87mm bore full forged wossner pistons egal rods etc, Obviouslly will be doing numerous oil changes, just wondered what people would recommend?

Also how much oil per change?

Its a rb25det by the way,

Thankyou in advance :)
 

·
Administrator
Joined
·
14,725 Posts
Mark there is a group buy going on on the 'Group buy' section funny enough on Silkolene 10w/50 oil, cheapest it will ever be again as Silkolene have put their prices up and in January VAT goes up so its the laast ever chance to buy oil this cheap.
 

·
tdi power
Joined
·
13,297 Posts
you dont want silkolene for runing in

use some semi synthetic from halfords
 

·
Seasoned Member
Joined
·
4,032 Posts
i ran my engine(forged wossners eagle rods ect)in on a straight mineral oil with the oil cooler disconnected,i used 15 w40 changed after 200 miles then 500 miles and then on to 1000 then switched to semi synthetic 10 w40 after 2k, i ran low boost and never passed 4.5 k rpm but ran in hard,no issues
 
1 - 11 of 11 Posts
Top