[Deazy]

I recently bought and had fitted a Greddy Profec B Spec 2 fitted and have noticed a small problem. The boost "pulses" until i put my foot right to the floor. Have fiddled with the settings but nothing changes it

I was told gettin a performance downpipe, elbow and decat should clear the problem so i got those fitted but it's still doing it.

Any ideas or what settings anyone else has set on their one?:sorry:

 

[DJD]

See the 'safest boost' thread
Ive just put a document on...

 

[Deazy]

Would do but my laptop is pants and i never installed word lol

My Settings at the moment are (This is turning the key but not starting the car) :

Turn the knob and set at 45%
[hi] x100 kPa
[hi] gain 10%
[hi] set gain 7.3 x100kPa
[hi] warning 0.99 x100kPa
[hi] warning level 6
[lo] [hi] 0.98 peak x100kPa
[lo] [hi] off peak

 

[Japtastic]

http://www.microsoft.com/downloads/...87-8732-48D5-8689-AB826E7B8FDF&displaylang=en

 

[DJD]

Low Settings

Set 20%
Gain 10%
Start Boost 0.60
Warning 0.80
Limiter 5%

High Settings

Set 30%
Gain 15%
Start Boost 0.70
Warning 0.90 (would recommend 0.85)
Limiter 5%

 

[cossiedave]

is your boost pipe on the right pick up?the one that goes into the controller not the solonoid