Skyline Owners Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
1,090 Posts
Discussion Starter #1
hi all anybody got any i can buy,there to fit on my r32 gtst thanks for invance.:dance:
 

·
Dandy Highwayman
Joined
·
1,314 Posts
you don't need a gtr rail for gtr injectors on an r32gtst - the plugs need a minor trim of a plastic lug but esssentially a straight fit

you will however need a gtr resistor pack as the stock injectors are high impedance and the gtrs are low
 

·
Banned
Joined
·
5,715 Posts
Good info,M8..:)
I was under the impression that RB20DET/RB25DET injectors were side feed,and RB26DETT injectors were top feed.?
Is that just R33/R34,then,not R32?
All info shared is a bonus to all members.:)
:cheers: Si
 

·
Dandy Highwayman
Joined
·
1,314 Posts
:) yeah the rb20det ones are top feed

interestingly ca18det injectors which are 370cc also are topfeed and work - they are low impedance so you need the injectors pack - but cheaper than gtr injectors and good for ~350bhp ...
 

·
Registered
Joined
·
1,090 Posts
Discussion Starter #7
:cheers: for that guys thought it was just take old ones out and put new ones in oh well need resister pack aswell then.:)
 
1 - 9 of 9 Posts
Top