[F1 carbon]

Just fitted some R32 GTR seats to my R33 GTST but the passenger seat rail is different on the front mounting. Is this the norm? Does it need bending down to fit?

 

[The Great White]

To the best of my knowledge, that's not normal. All R32 and R33 (regardless of the model) share the same seat rails!
Rails can be bent by someone sitting on the seat once it's removed and sitting on the ground - sounds like this may have happened ....?

 

[SMURF.]

As said 32/33 should be the same.

 

[F1 carbon]

Mmmm... Definitely the passenger seat rail nearest the door is straight, not bent.

 

[Scott B]

I fitted a set of R32 gtr front seats into my R33 gtst and they where a straight swap so should be the same bud.

 

[Skyline Boy]

I have R32 gtr seats in mine, no problems fitting them.

 

[The Great White]

Mmmm... Definitely the passenger seat rail nearest the door is straight, not bent.

Can you post a pic of the offending area?

 

[F1 carbon]

I will do in a couple of days, all the other mountings are correct just the one that isn't so looks like it has been bent back sometime. Unless they were altered to fit another vehicle in the past. I bought them second hand, so don't know their history.

 

[nova]

Should be straight fit mine were and skylineboy has my old ones.