Skyline Owners Forum banner

1 - 4 of 4 Posts

·
'NISMO' 350GT
Joined
·
488 Posts
Discussion Starter #1
Hi peeps - hopefully one of you mega intelligent chaps or chapesses can give me some info.
I am looking to replace the rear discs on my 'G' reg R32 GTS-T type M. Can I replace them with standard discs from an R33? Are they the same size? As far as I am aware, my discs are standard which I believe is 280x54x30?

Thanks in advance....nick
 

·
Registered
Joined
·
1,673 Posts
You are corect in that the discs are 280 x 54 x 30, the exact matches are from the following models:

S14 (200SX) 8/94 >

S15 2000 > and S15 2.0L turbo 1999 >

Z32 (300ZX) 1989/99 (VG30DTT)

300ZX USA version 7/90 - 96 and turbo 6/89 - 96


Given the right wheels you can also fit the R33 GTST 4 pot calipers, which will then allow you to fit the larger 296mm discs from the R33 GTST. The calipers and discs are a straight swap providing you have the 5 stud fixing, which on that year R32 you should have. The upgrade is superb, I did this and fitted DBA discs with Ferodo DS2500 pads, unbelieveable!


Aitch
 

·
'NISMO' 350GT
Joined
·
488 Posts
Discussion Starter #3
Nice one Aitch - many thanks.
 

·
Registered
Joined
·
1,673 Posts
Hi, just reread your original post and it seems you were referring to the rears!

Sorry, here's the spec for them..297 x 63 x 18, which are the same as the R32 GTR and the R33 GTST and R34.

Aitch
 
1 - 4 of 4 Posts
Top