Skyline Owners Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter #1
Hi,

I've just purchased a set of Z32 afm's to replace my stock R33 GTR ones.
I have found the pinouts of the Z32 afm's but I cannot find the pinouts of the stock units.

Does anybody have the pinouts for the Stock R33 GTR afm's so I can make a connector up ?

Cheers,
Mike
 

·
Registered
Joined
·
161 Posts
Mike look through the members list and PM/email Pidge as i'm 100% sure he knows this one. No doubt being such a good chap/ess he is he'll answer this one.
 

·
Registered
Joined
·
220 Posts
GTR Ones:
Pin 1 Not used
Pin 2 Air Signal out
Pin 3 Ground Power
Pin 4 Ground Signal
Pin 5 +12V Power Supply

300ZX (z32)Ones:
Pin A Not used
Pin B Air Signal out
Pin C Ground Power
Pin D Ground Signal
Pin E +12V Power Supply
Pin F Not used

Wire them as follows:
2 > B
3 > C
4 > D
5 > E


:)
 

·
Registered
Joined
·
104 Posts
Z32's??

While we are on the subject does anyone know what the max flow each for the Z32 AFM please??

Good to see your still tinkering Mike!!;)

Did you get my e-mail mate from a few weeks ago??

Cheers

Stu
 

·
Registered
Joined
·
220 Posts
About 400 hp each, some say 450+ but maxing out due to different air temps would become an issue.
 
1 - 11 of 11 Posts
Top