[dervdoc]

i bought a rb20det head of egay there, is it exactly the same as an rb25det head, are the cams and all the same,

 

[dervdoc]

anyone???

 

[leedanielsky]

alrite bud you brought that of me.

 

[MARKPRIOR]

not sure about the cams but the inlet manifolds are 100% different

 

[dervdoc]

alrite bud you brought that of me.

yea m8, with my head one of the exhaust bolt studs sheered and didnt come out as easy as the rest so needs bored and an oversized stud fitted thought i'd get away with this head using it

 

[dervdoc]

not sure about the cams but the inlet manifolds are 100% different

in what way exactly

 

[MARKPRIOR]

off the top off my head and a couple of fosters later the water ways are different hangon will check exactly

 

[MARKPRIOR]

taken from a driftworks thread

Yup your right inlet side of RB20 is different to RB25

But exhaust side is the same



If ya look at the Inlet manifold(GTR style) you can see the square water ways are not on the same surface as the Inlet throats....



Then look at the RB20 Head you can see that the square water ways ARE on the same surface as the Inlet throats



To be honest it looks one of the better Non-Greddy style inlets.....



Might hav it off ya for that sort of money....

Click here for full thread