Skyline Owners Forum banner

1 - 6 of 6 Posts

·
NORTHERN IRELAND AREA REP
Joined
·
8,660 Posts
Discussion Starter #1
As above anyone a link or info on torque settings?
 

·
Super Moderator
Joined
·
9,036 Posts
Is there not still a link to manuals on here somewhere? What torque settings are you after?
 

·
Registered
Joined
·
2,174 Posts
Head bolts - 93-103nm (loosen half way through the tightening cycles and then head on up to 93-103)

Main bearing cap bolts - 46-52nm

Conrod nuts - 14-16nm and then 60-65 degrees

All rbs have the same mains and rod torques, the headbolts are different, but apparently the 25 and 20 are the same, the 26 and 30 are different again
 

·
NORTHERN IRELAND AREA REP
Joined
·
8,660 Posts
Discussion Starter #6
Head bolts - 93-103nm (loosen half way through the tightening cycles and then head on up to 93-103)

Main bearing cap bolts - 46-52nm

Conrod nuts - 14-16nm and then 60-65 degrees

All rbs have the same mains and rod torques, the headbolts are different, but apparently the 25 and 20 are the same, the 26 and 30 are different again
My hero....
 
1 - 6 of 6 Posts
Top