Skyline Owners Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Hi everyone.
I started up my skyline after 5months. It runned on all 6 unntil i started driving a little bit, then it started running on 5 and now on 4 cylinder. It wont run on cyl 4&5.
I have ignition and i have tried to switch coils and sparkplugs so i know they work. I can hear the injectors click while the engine is running but when i take out the plug i dont smell much fuel.
Is it possible that these 2 injectors clicks but dont give any fuel?

Anyone have an idea?
 

·
Everybody knows that the bird is the word
Joined
·
9,198 Posts
Give the injector plugs a wiggle, see if that fixes it!
 

·
Registered
Joined
·
4 Posts
Discussion Starter #5
Thanks guys. More tips? I will try to give it a wiggle and see if that works.
I dont think the fuel filter is the problem since its only 2 cylinders that arent working and it is nr 4&5
 

·
Registered
Joined
·
359 Posts
Run some Fuel injector cleaner through it but don't drop it into the tank, part fill the fuel filter with it and put the remainder in the tank. You'll get a much higher concentration which should shift any crap causing a blockage.

You could always remove injectors 4+5 and see if they're looking dirty.

Plug gaps.. ?
 
1 - 6 of 6 Posts
Top