Skyline Owners Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
165 Posts
Discussion Starter #1
hi guys,

i am going to attemopt the rear fog conversion using the drivers side reversing light.

do i need to use a diode or can i just use wires direct from the bulb?
also where is the best place to get a supply feed from?


could someone possibly do a step by step guide for me
 

·
Registered
Joined
·
165 Posts
Discussion Starter #3
you can use a diode if you want, i didnt bother. I just ran a cable to a switch in the dash with a ground. Took about 10 mins.
how do i ground this?
sorry but when it comes to electrics i am useless!!!

would it be possible for a very quick drawing of how the wires should be

i do apologise for this
 

·
User of V-power
Joined
·
1,112 Posts
I use my 2 inside brake lights, using a diode, you can have them as brakes and as fogs off of a switch, there is a guide on here somewhere with a how too, (maby be on gtr.co.uk) this way you dont loose a reverse light.

Cheers
Dazzler
 
1 - 4 of 4 Posts
Top