Skyline Owners Forum banner

Stage 1 R33 GTST Remap V2

12283 Views 51 Replies 16 Participants Last post by  Dravvy
2
New Stage 1 R33 GTST ECU V2 Remap with improved Fuel and ignition tables, Limiter increased to 7400 and a few other tweaks. Will give slightly more power and response over older versions.

Modifications required are :-

Front Mount Intercooler
Full Exhaust System
Decat
Induction Kit
Boost increase to .85b
Shell V-Power 98+ Octane fuel

Power can be expected upto 330bhp depending on engine condition and correct setup of ignition timing.

The graph here shows before and after on a test vehicle with exactly the same boost but only a change from a standard ecu to the remapped ecu. As you can see the power & torque curves are flattened out with a healthy increase in both power and torque.

Price is £210 on a exchange basis.


See less See more
1 - 2 of 52 Posts
I have a font mount, full exhaust system not sure about decat as only got it recently plus passed an mot ok also induction kit. I only use v power but I wouldn't no how to increase the boost. So this would cost 210 plus my old ecu? Would having a 300zx ecu make things better? I have both ecus cheers
1 - 2 of 52 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top