Suspension?

3863 Views 8 Replies 5 Participants Last post by nissan doctor, Feb 18, 2010

Tricky-Ricky

Discussion Starter · Feb 14, 2010 (Edited)

Just to confirm, will coilovers designed for the 350Z fit the 350GT?

I am thinking BC coil overs, anyone have them fitted? and can anyone recommend a suitable spring rate, as the 350GT is a bit more lardy:naughty: err heavier than the 350Z, and is the damping still OK?

Save

1 - 9 of 9 Posts

g35brit

· #2 · Feb 14, 2010 (Edited)

These are the Tein codes for each model and they seem the same to me.
im doing my suspension in the spring and am in the process of sorting out everything i need including sway bars etc.

tom

NISSAN 350Z
Z33 03-08 MFP GSP24-FUAS1
$2460.00

NISSAN 350Z
Z33 03-08 CST GSP24-KUAS3
$2100.00

NISSAN 350Z
Z33 03-08 SDF GSP24-DUAS1
$2140.00

NISSAN 350Z
Z33 03-08 FLEX DSP26-6UAS1
$2190.00

NISSAN 350Z
Z33 03-08 BASIC DSP26-LUAS2
$1060.00 9/504

-------------------------------------------------------------------------------------------------

INFINITI G35 Coupe
V35 03-07 MFP 2dr Coupe GSP24-FUAS1
$2460.00

INFINITI G35 Coupe
V35 03-07 CST 2dr Coupe GSP24-KUAS3
$2100.00

INFINITI G35 Coupe
V35 03-07 SDF 2dr Coupe GSP24-DUAS1
$2140.00

INFINITI G35 Coupe
V35 03-07 FLEX 2dr Coupe DSP26-6UAS1
$2190.00

INFINITI G35 Coupe
V35 03-07 BASIC 2dr Coupe DSP26-LUAS2
$1060.00

See less See more

Save

nissan doctor

· #3 · Feb 14, 2010

As above, All mechanical parts are interchangable between 350z and 350gt. Only the exhaust center section requires an adaptor pipe to add in the extra 7inches approx.

Save

BLITZSKYLINE

· #4 · Feb 15, 2010

remember when lowering you need adjustable front arms , the front is not adjustable on the GT , a mate lowered his and did a set of 20in tyres in 2000 miles as so much neg camber , after a few £££ and adjustable arms he got the geometry back again , all 350z parts used ...

Nissan parts bin FTW !!

Save

Tricky-Ricky

Discussion Starter · #5 · Feb 15, 2010

Now i have heard this about the 350Z, but i thought you needed aftermarket parts to gain the adjustment?
Any idea how much the required parts are?

Save

nissan doctor

· #6 · Feb 16, 2010

Tricky-Ricky said:
Now i have heard this about the 350Z, but i thought you needed aftermarket parts to gain the adjustment?
Any idea how much the required parts are?

They will be aftermarket as the standard 350z arms are the same as the 350gt.

I have Kinetix front upper camber arms on mine and they are spot on although the joints require regular oiling.

The rear is OK as the standard set up has adjustment for camber.

I think I paid about $300 maybe for the Kinetix arms but several companies do them.

Save

Jester

· #7 · Feb 16, 2010

I had KW varient 2 fitted to mine before I knew anything about needing the front arms, but Revolutions got the camber on mine spot on....I'm confused

Save

Tricky-Ricky

Discussion Starter · #8 · Feb 16, 2010 (Edited)

Thanks! anyone recommend a suppler of the camber adjust arms at a good price?

I have also edited my original post with further questions, can anyone help?

Save

nissan doctor

· #9 · Feb 18, 2010

Jester_350GT said:
I had KW varient 2 fitted to mine before I knew anything about needing the front arms, but Revolutions got the camber on mine spot on....I'm confused

Are they top mount adjustable?

The factory arms don't have adjustment.

Save

1 - 9 of 9 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month