Skyline Owners Forum banner

1 - 20 of 24 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hello people

I am new in here , and new in skyline tuning.. BUT ;)
I am working on a little upgrade project.

Setup
3 " Exhaust
Garret GT3582 Turbo
Top Mount "China" manifold
"China" 38 mm wastegate
Oil Cooler
BIG intercooler :D
Greddy Blowoff
SPEC Stage 3+ Clutch
modified AEM Flywheil
modified AEM intake manifold
Fuel Pressure Regulator
Q45 AFM
Apexi FC
NGK Spark Plugs

and now i had a question .

Which size of injectors will fit my setup ? And which brand is good ? i have 4000 DNK ( 450 £ ) + - :)
Some links will be PERFECT !!!

best regards - Mickey , Denmark

 

·
Administrator
Joined
·
25,964 Posts
what power are you hoping to run and what you planning on going for in future?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
500 BHP on 1.3 bar :)? with "unopned" engine..
 

·
Administrator
Joined
·
25,964 Posts
550 cc injectors would do you and should be ok with unopened engine but i would budget for a rebuild just in case.

i wish i had done my engine build first then the turbo lol
 

·
Registered
Joined
·
16 Posts
Discussion Starter #5 (Edited)
Okey.. witch brand is good ?

have you killed your engine ;)

I still need help others :)
 

·
Administrator
Joined
·
25,964 Posts
brand can depend on your budget i use nismos but its all down to what you want:)

and yep killed my standard engine in less than a week after fitting a 400 bhp kit then promptly killed my forged engine due to a failed spark plug :)
 

·
Registered
Joined
·
16 Posts
Discussion Starter #8
Ohh...

My friend here in DK drive a steage whith RB25det . UNopned with 550 BHP.. and that setup is 3 years old :O!!!
 

·
No longer a rep :( but still here :)
Joined
·
6,432 Posts
I'd go 720's also. If you decide to go more in the future you got the flow then. Plus you dont wanna be running the 550's flat out
 

·
Registered
Joined
·
16 Posts
Discussion Starter #10
Okey 740 CC .. BUT what BRAND :D and Where can i buy them..

Normaly i only use Ebay .. but :/ i can dont find any there ..
 

·
Administrator
Joined
·
25,964 Posts
Ohh...

My friend here in DK drive a steage whith RB25det . UNopned with 550 BHP.. and that setup is 3 years old :O!!!
its pot luck if it lives or dies mate :)
 

·
Registered
Joined
·
932 Posts
i would be very careful running that cheap wastegate too!! i would advise getting a tial, worth getting ur manifold skimmed and braced too!
 

·
Registered
Joined
·
3,084 Posts
injectors should be rated at 80% at your peak power eg, if you are wanting to make 500, then 500cc/min should be 80% of their capacity

do not oversize, its false economy, the injectors will not atomise the fuel at low rpm, idle and the like and vbore wash occurrs and bad emissions
 

·
tdi power
Joined
·
13,297 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #19
Year :) but back to the topic .. can some one sent me a link to some good injectors to a good price :/ i can find any..
 
1 - 20 of 24 Posts
Top