Here you go mate http://www.archenemy.co.uk/

If you're feeling a bit brave you could buy a tool and DIY. I did mine recently and not too unhappy with the results

 

Were did you get your tool from Darth? If you excuse the term! Was it pricey?

 

I borrowed my tool from a local garage. It cost them £150 - SARD fender bender. You can get them from RHD japan.

use a dolly,ballhammer and heat gun ,you will struggle with the rears but mine came out realy well but ive now put gtr wings on and im looking for rear over fenders

Yeah, rears were a pig to do. I must admit i settled for less of a flare than i had originally intended to achieve

 

Just flair them out with an arch rolling tool, but i've seen many people break the tool trying to get there JDM flair on the go

 

use a dolly,ballhammer and heat gun ,you will struggle with the rears but mine came out realy well but ive now put gtr wings on and im looking for rear over fenders

 

i was goin to be gettin the guy near me to flair them, bodyshop fella who is aswsome. may end up gettin that done them

 

tbh i adapted a scissorjack to help with my rears,i welded one of my curved dollys to the top side of the jack then bolted my standard wheel back on slowly winding the jack out and using the heat gun i got a perfect 50mm flare. i now call it my super flare multi jack. its ok to call me pikey :crazy:

 

Phil at Archenemy did mine - I went for an extreme flare to get 10.5" wheels on all round - it can be done!

 

flair it will be then, how much they roughly cost.
archs are gettin rolled next week by skill customs next week, then maybe next monrh have them flared, if i still hve probs, tho im gettin skint spending all my money on it lmao

 

Wish there was someone that did 400 arches or similar for the R32, tryed everywhere but no luck! Thought about just getting the 400 ones and making them fit! Even toyed with the idea of MK2 Escort forest arches but thing they would be abit on the small side!